Treating Machine
HV-X series
product features:
·Control mode ·Simple mode ·Modbus,Profibus,Canbus ·Operation interface control ·PLCConfiguration 其他特點(diǎn) ·Output discharge control ·Watt density control ·Advanced processing ·Matching electrode |
|
Tantec's HV-X series discharge generators are a series of more advanced corona and plasma mainframes, which can be used alone or installed on OEM manufacturers' automated production lines.
When using plasma or corona equipment alone, the HV-X series discharge generator can control a 5.7 "touch screen through the operation interface, including the built-in PLC, including 16 input ports and 16 output ports, RS485 Modbus port, management data), Or connect to PLC interface through hardware.
For OEM manufacturers, the standard RTU4 core cable Modbus control can provide a proprietary communication platform. But you can also choose to use Profibus, CANopen and other communication methods. These require the use of a separate protocol converter in order to provide an instantaneous bus connection, such as Anybuscommunicator.
There are three generator models of HV-X02, HV-X10 and HV-X20.
HV-X series discharge generators can provide power output of 200, 1000 and 2000Watt, and are equipped with 17-hour high-voltage transformers with output voltages ranging from 2kV to 80kV. The output voltage range of the transformer is very large, so it can deal with various shapes and sizes of product surfaces.
Control mode
·Simple mode The most basic parameters can be adjusted via the knob and the LCD display on the front panel.
·Modbus (standard) can control all parameters for setting, storage, verification and monitoring (Profibus, CANopen and other bus control can be selected)
·Operation interface control X remote display (optional) The control parameters include setting, verification and monitoring parameters.
·PLC configuration (standard) The most important parameters can be controlled and adjusted via a PLC or similar central controller.
Other features
·Output discharge control has voltage limit or power limit.
·Watt density control According to parts / min, m / min, m * m / min control. (Only for Bus / Control interface control mode)
·Advanced processing The timer has 5 modes, 0.02-60s.
·Advanced processing The timer has 5 modes, 0.02-60s.
- Prev: PlasmaTEC-X
- Next FoamTEC